Zebra Technologies P1013372-001 REV. A User Manual
Page 119
Advertising
Cleaning
Cleaning the Laminator
P1013372-001 Rev. A
Zebra ZXP Series 8 Card Printer with Laminator
115
Step 8.
Insert the card into the slot (arrow below), adhesive side down.
Step 9.
Pull the card all the way through the Heater Assembly thereby cleaning the
heater rollers.
Step 10. Remove the card from the Heater Assembly.
Step 11. Turn the card over, adhesive side up; and repeat
Step 12. Reinstall the Heater Assembly.
Step 13. Close the Laminator Door.
Step 14. Press Exit on the OCP when done.
Advertising