Zebra Technologies P1013372-001 REV. A - Manual (Page 197)

Magnetic Card Encoder
P1013372-001 Rev. A Zebra ZXP Series 8 Card Printer with Laminator 193
Media Loading Orientation
Place the cards in the Input Hopper in the correct orientation as shown (with the magnetic
stripe down and facing to the rear). Ensure that the cards are seated properly the hopper.
Note • ONLY USE cards that comply with ISO 7810 and 7811 standards for magnetic stripe
cards. The magnetic stripe must be flush to the surface of the card to work properly.
Never use cards which have taped-on magnetic stripes.