Zebra Technologies P1013372-001 REV. A User Manual
Page 25
Advertising
Installation and Setup
Loading the Laminate
P1013372-001 Rev. A
Zebra ZXP Series 8 Card Printer with Laminator
21
Step 3.
Remove the cassette(s) by pulling each cassette straight out from its spindle.
Step 4.
Open the cassette(s), like a clam shell, by separating its two halves. Grasp the two
halves firmly with your fingers, then pull it apart. Do NOT use tools. (Upper
Laminate Cassette shown.)
Step 5.
If there is an empty laminate core in the cassette, remove it.
Advertising