Loading the laminate cassette(s) – Zebra Technologies P1013372-001 REV. A User Manual
Page 26
Advertising
22
Zebra ZXP Series 8 Card Printer with Laminator
P1013372-001 Rev. A
Installation and Setup
Loading the Laminate
Loading the Laminate Cassette(s)
Step 1.
Remove the new roll of laminate from its packaging.
Step 2.
Cut the laminate as shown, as close to perpendicular as possible.
Important •
The geared flange on the laminate spool is removable, but do not remove it. If it
does come off, snap it back onto the end of the spool.
Advertising