VEGA VEGASON 51V…53V - Manual (Page 23)

VEGASON 51 V … 53 V 23
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,
,,
,,
,,
,,
,,
,,
,,
,,
,
,
,
Min. distance, max. distance and meas. range (example VEGASON 51, 52 and 53)
15 m (type 53)
4 Mounting and installation
4.1 General installation instructions
Measuring range
You select your instrument beside other crite-
ria according to the required measuring
range. The reference panes for the min. and
max. distance to the product or the solid is
either the transducer surface (diaphragm) or
on instruments with flange version the instru-
Mounting and installation - General installation instructions
ment flange. Note the information for the refer-
ence panes in chapter "Dimensions". The
max. filling is dependent on the required min.
distance of the instrument used (0,25 m to
0,75 m) and the installation place of the in-
strument or the transducer.
full
Meas. range
Min.
distance
1m
7 m (type 52)
empty
Min.
distance
Min.
distance
4 m
(type 51)
0,25 m 0,4 m
0,75 m
Reference pane
Type 51 Type 53 Type 52