VEGA VEGASON 51V…53V - Manual (Page 62)

62 VEGASON 51 V … 53 V
Adjustment with medium
Fill the vessel e.g. to 10 % and enter in the
menu "
Min. set" with the "+" and "–" keys
10 %. Then fill the vessel e.g. to 80 % or 100
% and enter in the menu "
Max. set" with the
" +" and "–" keys 80 % or 100 %.
with
medium
Min.
set
at %
XXX.X
Max.
set
at %
XXX.X
Condit
ioning
Sca-
ling
0 %
corres
ponds
XXXX
100 %
corres
ponds
XXXX
Deci-
mal
point
888.8
prop.
to
Mass
Unit
Kg
5.) Conditioning / Scaling VEGAMET
Under the menu point " Conditioning/Scaling"
you enter the figure which corresponds to a
0 % and 100 % filling and choose beside the
position of the decimal point a physical unit,
e.g. distance.
Enter in the menu window " 0 % corresponds"
the value of the 0 %-filling (in the example of
the adjustment with PC these were 45 litres).
Confirm with "
OK".
With the key you change to the 100 %
menu. Enter the value of your parameter
corresponding to a 100 %-filling. In the
examble this had been 1200 for 1200 litres.
Confirm with "
OK".
If necessary choose a decimal point. How-
ever note that only max. 4 digits can be dis-
played.
In the menu "
prop. to" you choose the param-
eter (mass, volume, distance…) and in the
menu "
Unit" the physical unit (kg, l, ft 3 , gal, m 3
…).
Set-up - Adjustment with VEGAMET or MINICOM
If you do not know the distance, you have to
sound.
The indication stops flashing
and the adjustment will be
saved.
Hence you have adjusted the min. value.
OK
(Max. adjustment)
The max. adjustment is made like the min.
adjustment with "
+", "–" or "OK" (example:
1,270 m).
100.0%
at
m (d)
XX.XXX