VEGA VEGASON 51V…53V - Manual (Page 41)

VEGASON 51 V … 53 V 41
Set-up - Adjustment structure
6 Set-up
6.1 Adjustment structure
Series 50 ultrasonic sensors can be adjusted
with
- PC (adjustment program VVO)
- detachable adjustment module MINICOM
- signal conditioning instrument VEGAMET.
The adjustment must only be carried out with
one adjustment medium.
Adjustment program VVO
With the adjustment program VVO (VEGA
Visual Operating) on the PC you adjust the
ultrasonic sensors very comfortably. The PC
communicates via the interface adapter
VEGACONNECT 2 or the standard RS232
interface cable digitally with the sensor. The
adjustment can be carried out hence directly
on the sensor, at any position of the signal
line or on the processing system VEGAMET/
VEGALOG.
Note:
The adjustment with the PC via the interface
adapter VEGACONNECT 2 directly on the
sensor or on the signal line only allows the
"
Parameter adjustment" and corresponds to
the adjustment with the PC on VEGAMET or
VEGALOG on the following pages. Adjust-
ments for "
Configuration" are not possible with
direct connection of VEGACONNECT 2 to the
sensor or the signal line. Therefore this is
described separately in this operating in-
struction.
Signal conditioning instrument VEGAMET
The signal conditioning instrument VEGAMET
allows with the 6-key adjustment field with
text display the parameter adjustment in the
same functional spectrum than the adjust-
ment program VVO on the PC.
Adjustment module MINICOM
With the adjustment module MINICOM you
adjust in the sensor or in the external indicat-
ing instrument VEGADIS 50. The adjustment
module ensures with the 6-key adjustment
field with text display the parameter adjust-
ment in the same functional spectrum like the
adjustment program VVO or the 6-key ad-
justment field with text display on the signal
conditioning instrument VEGAMET.
The configuration adjustments however are
only possible with the adjustment program
VVO or the 6-key adjustment field with text
display on the signal conditioning instrument
VEGAMET.
Independent whether you carry out the set-
up of a meas. system (consisting of sensor
and signal conditioning instrument VEGAMET
or sensor and processing system
VEGALOG) with the adjustment software
VVO, with the signal conditioning instrument
or with the adjustment module MINICOM, the
way is always the same:
- Configure first a meas. system in the menu
"Configuration" and
- carry out the parameter adjustment of the
sensors in the menu "Instrument data".