VEGA VEGASON 51V…53V - Manual (Page 6)

6 VEGASON 51 V … 53 V
2
2
The PC can be connected to any individual
position of the system or the signal line. It is
hence connected with the two-wire PC-inter-
face converter VEGACONNECT 2 to the sen-
sor, the signal line or to the signal condition-
ing instrument, but also with a standard cable
(RS232) directly to the processing system
VEGALOG.
The adjustment and parameter adjustment
data can be saved with the adjustment soft-
ware on the PC and protected with pass-
words. If required the adjustments can be
transferred quickly to other sensors.
Product description - Adjustment
1.3 Adjustment
Each measuring distance is different, hence
each ultrasonic sensor must be given some
basic information on the application and the
environment.
E.g. you inform the sensor which level means
"empty" and which level "full". Beside this
"Empty and full adjustment" also a number of
other adjustments can be carried out with
VEGASON ultrasonic sensors.
The adjustment and parameter adjustment of
the ultrasonic sensors are hence carried out
with:
- the PC
- the signal conditioning instrument
VEGAMET 514 V or VEGAMET 514 V
- the detachable adjustment module
MINICOM
Adjustment with PC
The set-up and adjustment of the ultrasonic
sensors is generally made on the PC with the
adjustment program VVO (
V EGA V isual O p-
erating) under Windows ® .
The program leads quickly through the ad-
justment and parameter adjustment via pic-
tures, graphics and process visualizations.
Adjustment with PC on the digital signal and supply
line between the sensors and the signal conditioning
instrument VEGAMET or on the sensor itself (figure:
VEGASON 51 V)