VEGA VEGADIF 55 4 … 20 mA_HART - Manual (Page 43)

T he point is highlighted in black, i.e. you can now edit this position.
1. P ush "+" or "-" until "0" is displayed. 2. Confirm "0" with the "E" key.
C ursor jumps to the next position. "↵" is displayed and is highlighted in
black, see next illustration.
W ith "E" you save the new value and quit the editing mode, see next
illustration.
T he new value for the damping is 30 s. You reach the next parameter
with "E". You return to the editing mode with "+" or "-".
E
xample: Adjust measurement end - assign 20 mA to the pressure
value 400 mbar.
T he lower line on the local indication shows the existing pressure, here
400 mbar.
Take the pressure on the
instrument over as value
VEGADIF 55 • 4 … 20 mA/HART 43
6 O peration
31731
-EN
-081119