VEGA VEGADIF 55 4 … 20 mA_HART - Manual (Page 58)

T he following modes are available:
l P ressure
l L evel
l F
low
T he parameter LANGUAGE is assigned in the HART handheld to the
group DISPLAY (OPERATING MENU: "DISPLAY"). You select the
menu language for the local indication via the parameter LANGUAGE.
T he following languages are available:
l D eutsch
l E nglish
l F rançais
l I taliano
l E spañol
l N ederlands
l C hinese (CHS)
l J
apanese (JPN)
T he parameter MODE is displayed in the HART handheld in the
QUICK SETUP menus and in the function group BASIC SETUP
(OPERATING MENU: "SETTINGS" - "BASIC SETUP").
T he following modes are available:
l P ressure
l L evel
l F low
7 .4 Position correction
D ue to the installation position of the instrument, the measured value
can be shifted, i.e. the measured value does not show zero with empty
vessel. Three different possibilities for a position adjustment are
offered (menu path: ("GROUP SELECTION - OPERATING MENU -
SETTINGS - POSITION ADJUSTMENT").
Parameter
name Description
P osition correc-
tion (685)
E
ntry
I nput position adjustment - the pressure difference betwen
zero (set value) and measured pressure must not be known
(
there is a reference pressure on the instrument).
Example:
l MEASURED VALUE = 2.2 mbar
l You correct the MEASURED VALUE via the parameter
POS. ZERO ADJUST with the option "Confirm", i.e. you
assign the value 0 to the existing pressure
l MEASURED VALUE (after pos. zero adjust) = 0 mbar
l The current value is also corrected
l Default setting 0
HART handheld
58 VEGADIF 55 • 4 … 20 mA/HART
7 S et up
31731
-EN
-081119