GE Industrial Solutions AF-300 G11 - Manual (Page 144)

13-1
Data subject to change without notice 7/07. © 2007 GE Drives
13. Options
The drive supports two internally mounted cards. One option card is mounted under the main cover (Location A) and
the other option card is mounted in a special adapter under the keypad (Location B). Only one card can be mounted
in these locations. There are two different types of option cards, Type 1 and Type 2. You cannot use two Type 1 or
Two Type 2 cards but you can mix any combination of Type 1 and Type 2 provided you only have one option per
mounting location. Each option card must be mounted in the designated location. The chart below lists the option
card, their types, and their mounting locations.
Name Type Loc 2nd Option Function
Type/Loc
OPCG11SRY 1 A 2/B • Relay output card
(Relay output card) The transistor output from the drive control output terminals Y1
and Y4 are converted to the relay output (1SPDT).
OPCG11SDIO 2 A None • Frequency setting by binary code (max. 16 bits)
(Digital interface card) • Monitoring (8 bits) of frequency, output current, and output
voltage
OPCG11SAIO 2 A None • Auxiliary input for analog frequency setting (0 to +/-10 V)
(Analog interface card) • Monitoring of drive output frequency, current, and torque in
analog voltage, analog output 0-10 VDC abd 4-20mA
OPCG11SPG
(PG Feedback Card) 1 A 2/B • This will enable vector control by pulse generator feedback
signal
• Proportional operation, tuning operation (12/15 V; A, B Signal)
OPCG11SPG2
(PG Feedback Card) 1 A 2/B • This will enable vector control by pulse generator feedback
signal
• Proportional operation, tuning operation (5V; A, not A, B, not B
Signals)
OPCG11SSY 1 A 2/B • Two motors are driven synchronously.
(Synchronized operation
card)
OPCG11SCIO
1 A 2/B • 115 VAC Control input, an isolation amplifier,
(Interface card) relay output, PG encoder, analog output 4-20mA
OPCG11SLON 2 B 1/A • Serial communication card for LonWorks
(Communication card)
OPCG11SPDP
2 B 1/A • Serial communication card for Profibus-DP
(Communication card)
OPCG11SDEV
2 B 1/A • Serial communication card for Device Net
(Communication card)
OPCG11SCOP
2 B 1/A • Serial communication card for CAN
(Communication card)
OPCG11SMBP
2 B 1/A • Serial commnication card for Modbus plus
(Communication card)
OPCG11SIBS
2 B 1/A • Serial communcation card for Interbus-S
(Communcation card)
HE300GEN150
2 B 1/A • Serial communication card for Genius
(Communication card)
13.1 Built-in Options