GE Industrial Solutions AF-300 G11 - Manual (Page 97)

5-44
Data subject to change without notice 7/07. © 2007 GE Drives
A01 Maximum frequency 2
A 0 1 M A X H z – 2
This function sets the maximum frequency for Motor 2
output by the drive. It operates the same as F03 Maxi-
mum frequency 1. For details, see the explanation for
F03.
A02 Base frequency 2
A 0 2 B A S E H z – 2
This function sets the maximum output frequency in the
constant torque area for Motor 2 (i.e., output frequency at
rated output voltage). It operates the same as F04 Base
frequency 1. For details, see the explanation for F04.
A03 Rated Voltage 2
A 0 3 R A T E D V 2
This function sets the rated voltage output to Motor 2. It
operates the same as F05 Rated voltage 1. For details,
see the explanation for F05.
A04 Maximum Voltage 2
A 0 4 M A X V – 2
This function sets the maximum drive output voltage for
Motor 2. It operates the same as F06 Maximum voltage 1.
For details, see the explanation for F06.
A05 Torque boost 2
A 0 5 T R Q B O O S T 2
This function sets the torque boost function for Motor 2. It
operates the same as F09 Torque boost 1. For details,
see the explanation for F09.
A: Alternative Motor Parameters ( Motor 2 )
A06 Electronic thermal relay 2 (select)
A07 Electronic thermal relay 2 (level)
A08 Electronic thermal relay 2 (Thermal time
constant)
A 0 6 E L C T R N O L 2
A 0 7 O L L E V E L 2
A 0 8 T I M E C N S T 2
These functions set the function of the electronic thermal
overload relay for Motor 2. They operate the same as F10
to F12 Electronic thermal overload relay 1. For details,
see the explanations for F10 to F12.
A09 Torque vector control 2
A 0 9 T R Q V E C T O R 2
This function sets the torque vector function for Motor 2.
It operates the same as F42 Torque vector control 1. For
details, see the explanation for F42.
A10 Number of motor-2 poles
A 1 0 M 2 P O L E S
This function sets the number of poles to be driven by
Motor 2. It operates the same as P01 Number of Motor 1
poles. For details, see the explanation for P01.
A11 Motor 2 (capacity)
A 1 1 M 2 – C A P
This function sets the capacity of Motor 2. It operates the
same as P02 Motor 1 (Capacity). For details, see the
explanation for P02. However, the related motor data
functions change to A12 Motor 2 (Rated current), A15
Motor 2 (No-load current), A16 Motor 2 (%R1 setting), and
A17 Motor 2 (%X setting).
A12 Motor 2 (Rated current)
A 1 2 M 2 – L R
This function sets the rated current for Motor 2. It
operates the same as P03 Motor 1 (Rated current). For
details, see the explanation for P03.