3 entering data on the keypad panel, 1 operation mode, 2 setting digital frequency – GE Industrial Solutions AF-300 G11 User Manual
Page 41: Stop
4-4
Data subject to change without notice 7/07. © 2007 GE Drives
4.3 Entering Data on the Keypad Panel
4.3.1 Operation Mode
The screen for normal inverter operation includes a screen for displaying drive operating status and a screen for graphi-
cally displaying the status in the form of a bar graph. The operator can switch between both screens by using the function
(E45).
1) Operating Status (E45=0)
2) Bar Graph (E45=1)
4.3.2 Setting Digital Frequency
On the operation mode screen, press
or
to display the set frequency on the LED. Data is increased or
decreased in the smallest possible unit, depending on which key is pressed. The adjustments in data will occur rapidly if
the operator holds down
or
. To select a digit use
SHIFT
and then data can be set directly. To save the
frequency settings press
FUNC
DATA
.
Press
RESET
and
PRG
to to return to the operation mode. If keypad panel settings are not selected, the present frequency
setting mode appears on the LCD. When selecting the PID function, the PID command can be set with a process value
(refer to technical documentation for details).
1) Digital (keypad panel) settings (F01=0 or C30=0)
2) Non-digital setting
Direction of rotation = blank (no command) or FWD/REV
Operating status = STOP (no command) or RUN
Output frequency (maximum frequency at full-scale)
Output current (200% of inverter rating at full-scale)
Torque calculation (200% of motor rating at full-scale)
PRG
PRG
MENU
F/D
LED SHIFT
60.00
STOP
PRG
PRG
MENU
F/D
LED SHIFT
60.00
Hz
A
%
Fout/Iout/TRQ
60.00
RUN
FWD
Frequency setting value
Screen explanation
Present frequency setting mode
Operations guide
60.00
RUN
PRG
PRG
MENU
F/D
LED SHIFT
FWD
60.00
F/D
DATA SET
<DIG>SET Hz>
LOCAL
50 - 400
F/D
DATA SET
<DIG>SET Hz>
LOCAL
50 - 400
STORING...
56.89
Frequency setting value
Screen explanation
Present frequency setting mode
Frequency setting range
Operations guide
When
FUNC
DATA
pressed and writing
60.00
RUN
PRG
PRG MENU
F/D
LED SHIFT
60.00
F/D
DATA SET
<REMOTE REF>
12+V1