GE Industrial Solutions AF-300 G11 - Manual (Page 57)

5-4
Data subject to change without notice 7/07. © 2007 GE Drives
A. Alternative Motor Parameters
A: Alternative Motor Parameters
Func. Data Change
No. Setting Range Unit Min. 30 HP 40 HP Format During op
A01 Maximum frequency 2 A01 MAX Hz-2 50 to 400 Hz Hz 1 60 1 N
A02 Base frequency 2 A02 BASE Hz-2 25 to 400 Hz Hz 1 60 1 N
A03 Rated voltage 2 A03 RATED V-2 0 V 1 230V class: 230 1
(at Base frequency 2 ) 230V class: 80 to 240V 460V class: 460
460V class: 320 to 480V
A04 Maximum voltage 2 A04 MAX V-2 230V class: 80 to 240V V 1 230V class: 230 1 N
460V class: 320 to 480V 460V class: 460
A05 Torque boost 2 A05 TRQ BOOST2 0.0, 0.1 to 20.0 - - 2.0 3 Y
A06 Electronic (select) A06 ELCTRN OL2 0, 1, 2 - - 1 1 Y
A07 thermal 2 (level) A07 OL LEVEL2 20% to 135% if INV rated current A 0.01 motor rated current 19 Y
A08 (thermal time constant) A08 TIME CNST2 0.5 to 75.0 min min 0.1 5.0 10.0 3 Y
A09 Torque vector control 2 A09 TRQVECTOR2 0, 1 - - 0 1 N
A10 Number of motor 2 poles A10 M2 POLES 2 to 14 poles pole 2 4 9 N
A11 Motor 2 (capacity) A11 M2-CAP Up to 30 HP: 0.01 to 60 HP HP 0.01 motor capacity 5
40 HP and above: 0.01 to 600 HP
A12 (rated current) A12 M2-Ir 0.00 to 2000 A A 0.01 motor rated current 19 N
A13 (tuning) A13 M2 TUN1 0, 1, 2 - - 0 21 N
A14 (on-line tuning) A14 M2 TUN2 0, 1 - - 0 1 N
A15 (no-load current) A15 M2-Io 0.00 to 2000 A A 0.01 standard rated value 19 N
A16 (%R1 setting) A16 M2-%R1 0.00 to 50.00% % 0.01 standard rated value 5 Y
A17 (%X setting) A17 M2-%X 0.00 to 50.00% % 0.01 standard rated value 5 Y
A18 (slip compensation control 2) A18 SLIP COMP2 0.00 to 15.00 Hz Hz 0.01 0.00 5 Y
5-45
Name LCD Display
5-44
Pg.
Factory Setting
N
N