GE Industrial Solutions AF-300 G11 - Manual (Page 50)

4-13
Data subject to change without notice 7/07. © 2007 GE Drives
4.3.13 Data Copy
Select 9. Data Copy to display the Data Copy on the Program Menu screen. Read screen. A copy operation is then
performed in the following order: function data is read from the first inverter, the keypad panel is removed and attached to
a second inverter, the data from the first inverter is written to and stored in the second inverter.
The “verify” feature also makes it possible to compare and check differences in the data stored in the keypad panel and
the data stored in the inverter.
Read data
Write data
Attach keypad panel, Turn power ON.
60.00
RUN
PRG > PRG MENU
F/D > LED SHIFT
FWD
60.00
1.DATA SETTING
2.DATA CHECK
3. OPR MNTR
4. I/O CHECK
5. MAINTENANCE
6. LOAD FCTR
7. ALM INF
8. ALM CAUSE
> 9. DATA COPY
<DATA COPY>
READ
Data copy screen
Mode (read mode)
<DATA COPY>
READ
Reading
<DATA COPY>
30 HP-2
READ
COMPLETE
Data of drive type read
by keypad panel
Read complete
Remove keypad pananel
60.00
RUN
PRG > PRG MENU
F/D > LED SHIFT
FWD
60.00
1.DATA SETTING
2.DATA CHECK
3. OPR MNTR
4. I/O CHECK
5. MAINTENANCE
6. LOAD FCTR
7. ALM INF
8. ALM CAUSE
> 9. DATA COPY
READ
<DATA COPY>
30 HP-2
WRITE
<DATA COPY>
30 HP-2
WRITE
<DATA COPY>
30 HP-2 <DATA COPY>
30 HP-2
WRITE
COMPLETE
Write complete Writing
Mode (write mode)
Drive type of data
stored by keypad panel
PRG
PRG
PRG
FUNC
DATA
FUNC
DATA
FUNC
DATA
FUNC
DATA