GE Industrial Solutions AF-300 G11 - Manual (Page 47)

4-10
Data subject to change without notice 7/07. © 2007 GE Drives
Measuring time
PRG
FUNC
DATA
FUNC
DATA
4.3.10 Load Rate Measurement
Select 6. Load Rate Measurement (LOAD FCTR) on the Program Menu screen. The maximum current, average current,
and average braking power during the set measuring time are measured and displayed.
60.00
T=3600s
Imax=0.00A
Iave=0.00A
BPave=0.0%
60.00
T=150s
Imax=0.00A
Iave=0.00A
BPave=0.0%
60.00
T=600s
Imax=0.00A
Iave=0.00A
BPave=0.0%
60.00
T=3600s
Imax=56.4A
Iave=23.5A
BPave=10.4% Display returns to initial value
Maximum current
Average current
Average braking power
(Motor rated output/100%
Displays the remaining
measuring tim, when
reaches zero, ends the
measurement.
(Measures maximum current, average
current and average braking power in
600s intervals.)
Change measuring using and
and
Measuring time
Set measuring time
Start measuring
60.00
RUN
PRG > PRG MENU
F/D > LED SHIFT
FWD
1.DATA SETTING
2.DATA CHECK
3. OPR MNTR
4. I/O CHECK
5. MAINTENANCE
> 6. LOAD FCTR
60.00