GE Industrial Solutions AF-300 G11 - Manual (Page 96)

5-43
Data subject to change without notice 7/07. © 2007 GE Drives
H 3 8 N O R E S T
Setting range: 0 (no detection)
1 to 60 seconds
In a system where the drive is continuously polled within a
specific time, this function detects that access was
stopped due to an open circuit or other network fault and
results in an Er 8 trip.
H 3 9 I N T E R V A L
Setting range: 0.00 to 1.00 second
This function sets the time from when a request is issued
from the host device to when a response is returned.