Extron Electronics MTPX Plus 6400 Series User Guide - Manual (Page 112)

Figure 46. MTPX Picture Settings Window
MTPX RS-232 Port settings — Displays the UARTS / Direct-access (via IP) Port Settings
window (see figure 47), which allows you to select the input source for output on the
audio or RS-232 wire pair and configure the port settings. Available input selections are:
z z
TP inputs — The audio or RS-232 wire pair (3 and 6) on the TP input
z z
IP — RS-232 on a UART
z z Captive-screw Inputs — The RS-232 direct insert captive screw connector
Figure 47. MTPX RS-232 Port Settings Window
NOTE: The Captive-screw Inputs selection is available for inputs 1
through 16 only.
MTPX Plus 6400 Series Matrix Switchers • Matrix Software 106