Extron Electronics MTPX Plus 6400 Series User Guide - Manual (Page 82)

Command/Response Table for SIS Commands (continued)
Command ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Audio input gain and attenuation
NOTE: The set gain (G) and set attenuation (g) commands are case sensitive.
Set input audio gain to +dB
value X1! * X1( G In X1! •Aud X2)]
Example: 1*2G InØ1•Aud+Ø2 ] Set input 1 audio gain to +2 dB.
Set input audio attenuation
to -dB value X1! * X2! g In X1! •Aud X2)]
Increment gain X1! +G In X1! •Aud X2)] Increase gain by 1 dB.
Example: 5+G InØ5•Aud+Ø3 ] Increase audio input 5 level from +2 dB to +3 dB.
Decrement gain X1! -G In X1! •Aud X2)] Decrease gain by 1 dB.
Example: 7-G InØ7•Aud-Ø9 ] Decrease audio input 7 level from -8 dB to -9 dB.
Read input gain X1! G X2)]
Audio or RS-232 mute commands
Audio or RS-232 mute X@ *1Z Amt X@ *1 ] Mute output X@ audio or RS-232 (audio off).
Audio or RS-232 unmute X@ *ØZ Amt X@ *Ø ] Unmute output X@ audio or RS-232 (audio on).
Read audio or RS-232 mute X@ Z X1#] 1 = mute on, 0 = mute off.
Global audio or RS-232 mute 1*Z Amt1 ] Mute all audio or RS-232 outputs.
Global audio or RS-232
unmute Ø*Z AmtØ ] Unmute all audio or RS-232 outputs.
Names
NOTE: The following characters are invalid in names: + - , ` @ = [ ] { } ‘ “ ” ; : | \ and ?.
Write global preset name EX2@ , X2# NG } Nmg X2@ , X2#]
Example: E 1,Security 1NG
} NmgØ1 , Security 1 ] Name global preset 1 “Security 1.”
Read global preset name EX2@ NG
} X2#]
Example: E 2NG } Security 2 ]
Write room preset name EX2$ * X2@ , X2# NP } Nmp X2$ * X2@ , X2#]
Example: E 1*3 , Podium_DVDNP } NmpØ1*3 , Podium_DVD ] Name room 1, preset 3 “Podium_DVD.”
Read room preset name EX2$ , X2@ NP } X2#]
NOTES: • If a preset is unassigned, the X2# displays [unassigned].
• If a global preset is saved, but not yet named, the default name is Preset X2@ .
• If a room preset is saved, but not yet named, the default name is Rm X2$ Prst X2@ .
Write input name EX1! , X2# NI } Nmi X1! , X2#]
Example: E 1 , Podium camNI } NmiØ1 , Podium cam ] Name input 1 “Podium cam.”
Read input name EX1! NI } X2#]
Write output name EX@ , X2# NO } Nmo X@ , X2#]
Example: E 1,Main PJ1NO } NmoØ1,Main PJ1 ] Name output 1 “Main PJ1.”
Read output name EX@ NO } X2#]
NOTE: X@ = Output number 01 – (maximum number of outputs for your matrix size)
X1! = Input number 01 – (maximum number of inputs for your matrix size)
X1# = Mute status 0 = off (unmuted) 1 = on (unmuted)
X1( = Audio gain 00 – 24 (1 dB per step)
X2) = Numeric dB value –18 to + 24 (45 steps of gain or attenuation (default = 0 dB)
X2! = Audio attenuation 01 – 18 (1 dB per step)
X2@ = Global or room preset number 01 – 64 (global) or 01 – 10 (room)
X2# = Name 12 characters maximum for input, output, and global preset names
11 characters maximum for room preset names
Upper- and lower-case alphanumeric characters and _ / and spaces are valid.
X2$ = Room number (for room presets) 01 – 10
MTPX Plus 6400 Series Matrix Switchers • Programming Guide 76