Extron Electronics MTPX Plus 6400 Series User Guide - Manual (Page 49)

Example 7: Recalling a preset
In the following example, a preset is recalled to become the current configuration. The steps
show the front panel indications that result from your action.
1. Clear all selections: Press and release the Esc button. The button flashes once.
2. Select Recall Preset mode: Press and release the Preset button.
PRESET
1 2 3 4 15 16
I
N
P
U
T
S
17 18 19 20 31 32
33 34 35 36 47 48
49 50 51 52 63 64
All input buttons with
assigned presets light red.
Preset Assigned Press and release the
Preset button.
The Preset button lights.
No Preset Assigned
3. Select the preset: Press and release the input button for the desired preset.
C O N T R O L
PRESET ENTER ESC VIEW
I
N
P
1 2 3 4 15 16
17 18 19 20 31 32
Press and release the Input 1 button.
The button blinks red to indicate that this
preset number is selected but not recalled.
The Enter button blinks
to indicate the need to
recall the preset.
4. Confirm the recall: Press and release the Enter button. The configuration stored in the
selected memory location is now the current configuration and can be viewed in the
View mode (see example 4 ).
C O N T R O L
PRESET ENTER ESC VIEW
I
N
P
1 2 3 4 15 16
17 18 19 20 31 32
The Enter and Preset
buttons return to unlit or
background illumination.
Press the button.
All input buttons return to unlit or background illumination.
MTPX Plus 6400 Series Matrix Switchers • Operation 43