Extron Electronics MTPX Plus 6400 Series User Guide User Manual
Page 124
5.
Press the keyboard <Enter> key. The switcher checks to see if it is password protected.
If the switcher is not password protected, it checks and downloads the HTML pages
(proceed to step 7).
If the switcher is password protected, the switcher downloads the Connect to... page
(see figure 58).
Figure 58.
Connect to... Page
NOTE: A
User name
entry is not required.
6.
Click in the
Password
field and type in the appropriate administrator or user password.
Click the
OK
button.
7.
The switcher checks several possibilities, in the following order, and then responds
accordingly:
z
z
Does the address include a specific file name, such as 10.13.156.10/file_name.html?
If so, the switcher downloads that HTML page.
z
z
Is there a file in the memory of the switcher that is named “index.html”?
If so, the switcher downloads “index.html” as the default startup page.
z
z
If neither of the above conditions is true, the switcher downloads the factory-
installed default startup page, “nortxe_index.html” (see figure 59), also known as
the System Status page.
MTPX Plus 6400 Series Matrix Switchers • HTML Operation 118