Extron Electronics MTPX Plus 6400 Series User Guide - Manual (Page 77)

X2@ = Global or room preset number 00 – 64 (global) (00 = current default) or 01 – 10
NOTE: A room preset is a stored configuration with all of the outputs assigned to a single room. When a room preset is recalled from
memory, it becomes the current configuration.
X2# = Name 12 characters maximum for input, output, and global preset names
11 characters maximum for room preset names
Upper- and lower-case alphanumeric characters and
_ / and spaces are valid.
NOTE: The following characters are invalid or not recommended in the name: {space} ~ , @ = ‘ [ ] { } < > ’ “ ” ; : | \ and ?.
X2$ = Room number (for room presets) 01 – 10
NOTE: A room is a subset of operator selected outputs that relate to each other. The MTPX matrix switcher supports up to 10 rooms, each
of which can consist of from 1 to 10 outputs.
X2% = Group number (for I/O grouping) 1 – 4 or 0 = no group
X2^ = Audio or RS-232 mute 0 = no mutes
2 = audio or RS-232 mute
X2&
= Local input select DIP switch position 0 = RJ-45 position
1 = local input position
X2* = Number of inputs 48 or 64
X2( = Number of outputs 32, 48, or 64
X3) = Part number See “ Part Numbers ”
X3! = Firmware version number to second decimal place (n.nn)
X3@ = Verbose firmware version-description-upload date and time See the “ Query firmware version (verbose) “ command on page 81.
X3#
= Voltage Voltage, polarity (positive or negative) and magnitude
X3$ = Internal temperature Degrees Fahrenheit
X3% = Fan speed (in RPM)
X3^ = Power supply status 0 = Out of tolerance or failed
1 = Ok
MTPX Plus 6400 Series Matrix Switchers • Programming Guide 71