Extron Electronics MTPX Plus 6400 Series User Guide - Manual (Page 130)

Email Settings Page
Reach the Email Settings page (see figure 63) by clicking the Email Settings link on the
System Settings page. The Email Settings page has fields for setting up the email notification
capabilities of the switcher. For the email settings and for each row of the email notification
settings, click the
Edit button to make the fields available for editing. The button changes
to Save . After editing the associated settings with, click the Save button.
Select Passwords
Select System Settings
Select Firmware Upgrade
Refresh
Figure 63. Email Settings Page
Mail IP Address field
The Mail IP Address field displays the IP address of the email server for the facility in
which the MTPX Plus matrix switcher is installed. Standard IP protocol rules apply to the
Mail IP address field.
Setting up SMTP authorization
If desired, set the switcher to require SMTP authorization before accepting any email as
follows:
1. Click Edit. The button changes to Save .
2. Check the SMTP Authorization Required check box, located below the Domain
Name field . This enables the User Name and Password fields below the check box.
3. Enter a user name and a password in the User Name and Password fields. For the
switcher to accept their e-mail messages, senders must enter the user name and
password.
NOTES: • For the user name, any combination of letters, numerals, spaces, and
symbols except the comma (,) and the single and double quotation marks
(‘ and “) can be used. For the password, all characters except the comma
can be used. The user name and password can each be from 1 to 30
characters.
• Both a user name and a password must be specified.
MTPX Plus 6400 Series Matrix Switchers • HTML Operation 124