Extron Electronics MTPX Plus 6400 Series User Guide - Manual (Page 17)

Installation
This section details the installation of the MTPX Plus matrix switchers, including:
z z
Setup and Installation Checklist
z z Rear Panel Cabling and Features
z z Front Panel Features
Setup and Installation Checklist
Get Ready
c Familiarize yourself with the matrix switcher.
c Obtain IP setting information for the matrix switcher from the local network
administrator. Read “ Ethernet Connection .”
Perform Physical Installation
c If desired, install the switcher in a rack (see page 140 ).
c Cable input and output devices (see page 13 ).
c As desired, connect computers, control systems, or both to the rear panel Remote
port (see page 17 ), LAN port (see page 18 ), and front panel Configuration port (see
page 20 ).
c Connect power (see page 19 ).
c Test the switcher by creating a tie (see page 31 ).
Install Software
c Install the Matrix Switchers Control Program (see page 87 ).
MTPX Plus 6400 Series Matrix Switchers • Installation 11