Installation and commissioning, Safety instructions – Burkert Type 8045 User Manual

Page 21

Advertising
background image

17

Installationandcommissioning

7.

InSTAllATIon AnD commISSIonInG

7.1.

Safety instructions

danger

risk of injury due to high pressure in the installation.

• Stop the circulation of fluid, cut off the pressure and drain the pipe before loosening the process connections.

risk of injury due to electrical voltage.

• Shut down the electrical power source of all the conductors and isolate it before carrying out work on the system.

• Observe all applicable accident protection and safety regulations for electrical equipment.

risk of injury due to high fluid temperatures.

• Use safety gloves to handle the device.

• Stop the circulation of fluid and drain the pipe before loosening the process connections.

risk of injury due to the nature of the fluid.

• Respect the prevailing regulations on accident prevention and safety relating to the use of aggressive fluids.

Warning

risk of injury due to non-conforming installation.

• The electrical and fluid installation can only be carried out by qualified and skilled staff with the appropriate

tools.

• Install appropriate safety devices (correctly rated fuse and/or circuit-breaker).

• Respect standard NF C 15-100 / IEC 60364.

• Respect the assembly instructions for the fitting used.

risk of injury due to unintentional switch on of power supply or uncontrolled restarting of the
installation.

• Take appropriate measures to avoid unintentional activation of the installation.

• Guarantee a set or controlled restarting of the process subsequent to any intervention on the device.

Warning

Danger due to non-conforming commissioning.

Nonconforming commissioning could lead to injuries and damage the device and its surroundings.

• Before commissioning, make sure that the staff in charge have read and fully understood the contents of the

manual.

• In particular, observe the safety recommendations and intended use.

• The device / the installation must only be commissioned by suitably trained staff.

protect this device against electromagnetic interference, ultraviolet rays and, when installed out-

doors, the effects of the climatic conditions.

English

Type 8045

Advertising