Luminex 100 IS Version 2.3 - Manual (Page 114)

Luminex 100 IS User Manual Version 2.3
x
MAP Technology
5 - 72 PN 89-00002-00-072 Rev. C
Create a New Lot ‹
To create a new lot:
1. On the Home tab, click New Lot. The Open Template dialog
box opens. See Figure 5-41.
Figure 5-41. Open Template Dialog Box
2. Highlight the template that will use the new lot information and
click Select. Then, continue with substep “a” or” b”.
a.) If this is a new template with no associated lot information, a
New Standard Lot or New Control Lot dialog box opens as
appropriate. Enter the standard and control numbers to con-
tinue. Once you enter the numbers, the Update Lot Informa-
tion dialog box opens. See Figure 5-42 and Figure 5-43.
b.) If the template has associated lot information, the Update
Lot Information dialog box opens. To create a new lot when
there is an existing lot, click New Lot on the Standard or
Control section of the dialog box. A New Standard Lot or
New Control Lot dialog box opens. Enter the standard or
control lot number. See Figure 5-42 and Figure 5-43.
3. Click OK.
Figure 5-42. Add Lot Standard and Control Dialog Boxes
Note: Depending on the
types of products associ-
ated with the template that
you select, the screen may
vary from the example in
Figure 5-43. That is, if you
are creating only standard
lots, then only the upper