Luminex 100 IS Version 2.3 - Manual (Page 197)

x
MAP Technology Luminex 100 IS 2.3 Software Installation
PN 89-00002-00-072 Rev. C B - 15
Luminex 100 Version 1.7
with Windows 98 to
Luminex 100 IS
Version 2.3
Overview of upgrade to Luminex IS 2.3 software procedure:
• Install new PC
• Install Luminex IS 2.3 software
• Verify successful upgrade.
Install New PC
‹
To install the new PC:
1. Close all applications. Perform a complete system shutdown.
Turn the power off and unplug the Luminex 100 analyzer,
Luminex XYP, and PC.
2. Remove all connections from the old PC. Remove the old PC
and set aside. Place the new PC in place.
3. Connect the monitor, power, and Com cables to the new PC.
4. Install the keyboard into a USB port.
5. Connect the barcode reader to the back of the PC. Connect the
mouse to the mouse port. Continue with the Install Luminex 100
IS 2.3 Software section.
Install Luminex
100 IS 2.3
Software
‹
To install the Luminex 100 IS 2.3 software:
1. Turn on power to only the PC and monitor (switches are on the
front). The system starts up Windows.
2. Log into Windows as local Administrator:
a.) In the Welcome to Windows dialog box, press Ctrl+Alt-
Delete.
b.) In the Log On to Windows dialog box, enter Administrator
in the User Name box. In the Password box, enter the
Administrator password. If you do not know it, see your IT
representative or contact Luminex Technical Support. In the
Log on to box, select the name of your local machine from
the scroll list.
c.) Click OK to complete the log on procedure.
d.) Verify that all applications are closed.
3. Insert the Luminex 100 IS 2.3 software CD into the drive. The
CD autoplays and in a few moments displays the Luminex 100
IS 2.3 splash screen. See Figure B-15.