Watlow PPC-2000 - Manual (Page 153)

PPC-2000 User’s Guide Chapter 3: Operating with AnaWin 3
Doc.# 30002-00 Rev 2.3 Watlow Anafaze 127
Inputs
Parameters on the Inputs spreadsheet determine how
measurements of signals from sensors attached to the analog
input modules are read and scaled into engineering units for
use by closed-loop control channels, monitor channels and logic
programs.
Figure 3.15 Inputs Spreadsheet
Figure 3.16 Analog Input Names
Select the Inputs button to configure or monitor PPC input
parameters. Input names are located in the first column; each
input has a row of associated parameters. The default input
name identifies the PPC, module and module I/O number.
Double-click on a parameter to edit it.
The module type is indicated in the default input name. Module
types are abbreviated. See Table 3.14 for a description.
Table 3.14 Module Abbreviations Seen on the
Inputs Spreadsheet
For example, PPC1:AI 1.3 indicates PPC #1, the analog input
module with address 1, and input #3. For a description of
module addresses, see Module Addresses on page 17 for a table
that correlates the module I/O numbers with screw terminals
on the AITB, see Table 2.13 on page 48.
Module Type Abbreviation
PPC-202x Analog Input AI
PPC-2030 Encoder Input Analog Output EIAO
PPC-2010 Processor Proc
PPC-2040 Digital I/O DIO
PPC1:AI 1.3
module address
controller number
module type abbreviation
module I/O number