Sdac specifications, Sdac specifications 265, Table 7.78—environmental specifications 265 – Watlow PPC-2000 User Manual
Page 293
PPC-2000 User’s Guide
Chapter 7: Specifications
Doc.# 30002-00 Rev 2.3
Watlow Anafaze
265
Table 7.74
Dimensions with Din Rail Bracket
Table 7.75
Power Specifications
Table 7.76
Connections
Table 7.77
Safety and Agency Approvals
SDAC
Specifications
Watlow Anafaze offers a Serial DAC for precision open-loop
control. The SDAC is jumper selectable for a 0-10Vdc or
4-20mA output. Multiple SDAC modules can be used with one
PPC system. The SDAC carries a CE mark.
Table 7.78
Environmental Specifications
Height
4.5 in.
114 mm
Width
1.9 in.
48 mm
Depth
8.5 in.
216 mm
Input
88 to 132Vac (115V Range)
176 to 264Vac (230V Range)
Output
V1: +5Vdc @ 6A
V2: +24Vdc @ 4A
Input Frequency
47 to 440 Hz
Peak Current Output
9A @ 5Vdc
6A @ 24Vdc
Connector Type
Spade
Output Screw Terminal Wire Gauge
24 to 12 AWG
Screw Terminal Torque
0.5 to 0.6 Nm (4.4 to 5.3 in-lb.)
UL
C-UL
UL 1012, UL 1950
CE
EN 60950
CE EMC
EN 55022
Storage Temperature
-20 to 60°C
Operating Temperature
0 to 70°C
Humidity
10 to 95% non-condensing
50