Ppc-2030 encoder in analog out specifications, Figure 7.6—ppc-2030 front view 240 – Watlow PPC-2000 User Manual
Page 268
Advertising
Chapter 7: Specifications
PPC-2000 User’s Guide
240
Watlow Anafaze
Doc.# 30002-00 Rev 2.3
PPC-2030 Encoder In Analog Out Specifications
5Vdc is supplied at a maximum of 60mA per encoder. An
external terminal block is used to interface to the encoders.
The analog output is isolated (12Vac) individually from
processor and bus power common. In both voltage and current
modes, the return is to the analog common.
The PPC-2030 bottom panel includes two encoder input
15-pin HD connectors and two analog output connections with
two, 4-position plug type connectors. Each signal has a
dedicated return.
Figure 7.6
PPC-2030 Front View
4 ENCODER IN
4 ANALOG OUT
PPC-2030
STATUS
MODULE
11
12
13
14
PXX-XXXXX
Status
LED
Rotary
Address
Switch
Advertising