Watlow PPC-2000 - Manual (Page 51)

PPC-2000 User’s Guide Chapter 2: Hardware Installation
Doc.# 30002-00 Rev 2.3 Watlow Anafaze 27
DIN Rail Mounting
1. Each module in the assembly has a DIN rail latch. Pull all
the latches to the open position. See Figure 2.11.
Figure 2.11 DIN Rail Latches
2. Place the module assembly on the upper lip of the DIN
rail; push the lower side of the assembly over the lower lip
of the DIN rail. See Figure 2.12.
Figure 2.12 Mounting Assembled PPC
Modules on a DIN rail (side)
3. Push the DIN rail latches up and under the lower lip of the
DIN rail.
DIN Rail Latch
(open)
DIN Rail Latch
(closed)
DIN Rail Latch
(open)
Upper lip of
DIN Rail
Push to lock