HP Integrity NonStop H-Series - Manual (Page 101)

WVP NonStop Storage Analyzer User Guide – 536988-001
- 101 -
NSSTORA 103
<Program Name> <Function Name>: Decompose Error: <Error Number>
Relating to function or activity: Primary or backup SAMGR process trying to retrieve process
information from the process handle.
Cause: Occurs on the “PROCESSHANDLE_DECOMPOSE_” Guardian procedure call. The Guardian
error number indicating what the cause was is part of the event text. This could occur due to various
reasons, for e.g. non-existent process (Error 14).
Effect: The primary SAMGR/SAHRLY* process will not be able to communicate with the backup and
vice versa. This will prevent the backup process to take over as the primary in case the primary
process goes down. The primary will not be aware if the backup goes down and the nonstop
operation of SAMGR will not take effect.
Recovery: Recovery will depend on the specific Guardian error returned. For e.g. Error 14 can be
recovered from by restarting the Web ViewPoint (and hence Storage Analyzer) processes
*Note: The Hourly alerts are not currently being supported in Storage Analyzer. It’s reserved for future
release.
NSSTORA 104
<Program Name> <Function Name>: PROCESS_GETINFO_ error: <Error Number>
Relating to function or activity: Creating and verifying creation of a new process or accessing
information about an existing process.
Cause: Occurs on the “PROCESS_GETINFO_” Guardian procedure call that is triggered after
process creation. The Guardian error number indicating what the cause was is part of the event text.
This error condition could occur due to various reasons, for e.g. Error 1 for a file system error.
Effect: The daily database updates or the one-time loads will not be completed.
Recovery: Recovery will depend on the specific Guardian error returned. For e.g. Error 5 means the
processor where the process was to be run is unavailable. To correct this, run the process on another
processor.
NSSTORA 107
<Program Name> <Function Name>: Process init Error <Error Number>
Relating to function or activity: SAMGR process creates SA Host process (SAPROC) but is unable to
open that process for writing the relevant startup messages.
Cause: Occurs due to Incorrect or Insufficient startup parameters (e.g. invalid processes handle)
passed to the process in interest.
Effect: The corresponding process dies.
Recovery: Restart Web ViewPoint (and hence Storage Analyzer) processes.
NSSTORA 109
<Program Name> <Function Name>: Error opening process <Filename>:<Error Number>
Relating to function or activity: Process could not be opened to perform I/O Operation.
Cause: The process could not be opened. The EMS Event indicates the error value returned by the
Guardian Procedure call FILE_OPEN_.
Effect: Any future I/O Operations with the Process will fail.