2-2 runlog admin, Figure 3-23 runlog admin, Figure 3-24 runlog calendar – HP Integrity NonStop H-Series User Manual
Page 42: Runtime log, R day, the, Runlog calendar, Marks the correspon
Administration
WVP NonStop Storage Analyzer User Guide – 536988-001
- 42 -
3-2-2 Runlog Admin
The Runtime Log screen can be accessed via Web Viewpoint by clicking on the Admin-> SA
Runtime Admin and selecting the Runlog tab as shown below:
Figure 3-23 RunLog Admin
The Runlog Admin displays a calendar which highlights (in green) a date if a collection was run for
that date and therefore the data should be available for analysis. The maximum numbers of days
marked as green depend on the “retention days” field specified in the
retention period is for 10 days, then only the last 10 days or the days with data, whichever is lower,
will be marked with a green background and their data will be available to analyze on the Storage
Analyzer main screen.
Figure 3-24 Runlog Calendar
Since the maximum retention period in
is 180 days, it is possible for the data to be
spread across consecutive year boundary. If such is the case, the calendar will have an entry of the
previous year and the rollover data can be accessed by changing the year from the dropdown. The
year can be changed by selecting a different year from the dropdown box at the upper right.