HP Integrity NonStop H-Series - Manual (Page 22)

Installation and Configuration
WVP NonStop Storage Analyzer User Guide – 536988-001
- 22 -
Figure 2-9 Wizard Installation – Single-node configuration
Alternately, if multiple-node installation is selected, users are presented with a form to; you
can choose the ‘Multi-node’ option. This screen will accept address of multiple
nodes/residents. While a single set of WVP and Storage Analyzer locations are to be
entered at the bottom, you will get a chance to review these again before beginning the
installation for each node separately:
Figure 2-10 Wizard Installation – Multi-node configuration
Note: Even though it is possible to install NonStop Storage Analyzer on multiple nodes, it will
only display data for the node on which Web ViewPoint is running. NonStop Storage Analyzer
does not display data about other residents of the neighborhood simultaneously.
d. Clicking on NEXT brings up the following Logon form. This screen prompts you to enter the
userid and password to log on to the node/resident. Also, the information entered in the
previous screens is listed here and can be modified if necessary. You need to specify a free
port using which the Storage Analyzer client will run. Clicking on ‘Logon’ will begin the file
transfer and installation: