HP Integrity NonStop H-Series - Manual (Page 20)

Installation and Configuration
WVP NonStop Storage Analyzer User Guide – 536988-001
- 20 -
2-2-5 Wizard Install
NonStop Storage Analyzer comes with a powerful, flexible and smart PC based installer. The PC
based installer provides a comprehensive wizard that guides the user through the install process.
Install options provide paths for different possibilities like default installation or single-resident
installation.
2-2-5-1 Overview
The Wizard builds all of the NonStop configuration files on the PC, then automatically FTPs the files
to the NonStop and initiates NSA. Normally this should take less than 15 minutes, provided you
have a few items of configuration data at your fingertips. The Wizard has defaults for nearly all
required parameters, so if you are a new user your data input requirements are minimal. Once you
get the software installed and operational you can easily adjust your configuration to fit your specific
needs.
Common features in all installer pages:
Once you have a compatible Java version, you may start the install. The wizard will ask for inputs to
determine the configuration in several steps during the install process. Most of the pages have the
following buttons:
o
Help - Display the particular help window. Help can also be activated by clicking
the keyboard help key, which is typically F1.
o
Default – When present this button will populate some of the input fields with
system default values. The default function is used where possible and will not be
available on all pages.
o
Prev – When present this button allows you to go back to a previous page and
adjust/modify input fields. If you go back, the page will be populated with
previously selected values.
o
Next/Advanced - This will save the values in the current page and take you to the
next installation step.
o
Finish - Four of the pages contain this button. This means that the remaining steps
can be skipped by using system default values for those steps. Process name
configuration is the first page to contain this button. Clicking this button will take
you to the 'Display configuration' page that displays the overall settings selected by
you. Remember, you can go back to any previous page and modify these settings.
o
Quit – Use this button to cancel or stop the installation. The wizard will ask for a
confirmation. Your install is not complete and must be restarted.
Pages with input text fields provide input format checking before going to the next page. For some
text, installer automatically up shifts the characters to capital letters.
[Back to TOC]