HP LaserJet 6pmp Printer series - Manual (Page 14)

Step 3. Remove the Internal Packaging
N o t e
Save all packing material. You may need
to repack the printer at a later date.
1 Slide Tray 2 out of the printer.
2 Remove the orange shipping retainer
inside Tray 2 by pressing the retainer
down and straight back. (If it is
difficult to remove, try rotating the
retainer while pulling backwards.)
Slide Tray 2 back into the printer.
3 Open the top cover by pressing the
top cover release button.
4 Remove the two orange shipping
retainers in the toner cartridge area.
You do not need to close the top cover if
you are installing the toner cartridge next.
(See the following page.)
1
Pr
inter
S
et
up
EN
Printer Setup 1-5