HP LaserJet 6pmp Printer series - Manual (Page 91)

Secondary Light Patterns
Continuable Error (three different light patterns are possible)
A temporary error occurred during printing.
•
Press [Go] . The page will automatically reprint.
Temporary Error (three different light patterns are possible)
The printer detected a temporary error condition.
•
Reset the printer by briefly turning the printer off and back on. If the
problem persists, contact your dealer or HP service representative.
NVRAM Error (two different light patterns are possible)
The nonvolatile memory (NVRAM) is temporarily full.
•
Press [Go] to clear the message. Check the printer settings to ensure
they are correct. If the problem persists contact your dealer or HP
service representative.
Service Error
The printer detected a problem requiring service.
•
Call your dealer or HP service representative.
5-14 Problem Solving
EN