HP LaserJet 6pmp Printer series - Manual (Page 71)

Producing Better Looking Documents
The print quality settings described in this section can be changed
through the following software:
•
Windows printer drivers (see page 2-15)
•
DOS Remote Control Panel (see page 2-18)
•
Macintosh printer drivers (see page 2-19)
Refer to help screens in the software for specific information on each
setting and how to adjust them.
Enhancing Printer Resolution (REt Setting)
Resolution Enhancement technology (REt) adjusts the size and placement
of dots on the page to produce smooth angles, curves, and edges. Print a
self test (see page 2-9) and examine the REt block (see letter
D ,
page 2-10) on the printout. The block should be a uniform gray with no
vertical lines, or with vertical lines tending toward dark rather than light.
If the REt setting needs to be adjusted, access the printer driver (or DOS
Remote Control Panel) and find the Resolution Enhancement option.
Print another self test and examine the REt block. If needed, change the
setting again.
Adjusting Print Density
Print density is a measure of the darkness of print on the page.
To lighten or darken the print density, access the HP LaserJet Utility (or
DOS Remote Control Panel) and find the Print Density option.
Using Watermarks
A watermark is a light image printed in the background on a page. For
instance the word “
Confidential ” could be watermarked in the
background on an important document.
Watermark controls are located in the printer driver. Some printer
drivers may not have this feature. Check your printer driver for
availability.
4-2 Printer Tips and Maintenance
EN