HP LaserJet 6pmp Printer series - Manual (Page 16)

Step 5. Load Paper into Tray 2
1 Slide Tray 2 (paper cassette) out of
the printer.
2 Load paper up to the arrows on the
paper length spacer in the rear of the
tray (approximately 250 sheets of
Letter, A4, Executive, B5, or Legal
paper).
3 Make sure the paper is flat in the tray
at all four corners. If needed, press on
the clip lever (
A ) to raise the front left
metal holder ( B ) so the paper will fit
underneath.
4 Align the slots ( C ) on the sides of
Tray 2 with the rails ( D ) inside the
Tray 2 cavity. Slide Tray 2
completely back into the printer.
C a u t i o n
Tray 2 is designed for paper use only. Use
Tray 1 to print envelopes, adhesive labels,
transparencies, cardstock, or custom sized
media.
Tray 2 hints
•
To adjust Tray 2 for other paper sizes,
see page 3-6.
•
For letterhead orientation in Tray 2,
see page 3-11.
•
For paper and other media
specifications, see Appendix B.
1
Pr
inter
S
et
up
EN
Printer Setup 1-7