Changing paper size in tray 2 – HP LaserJet 6pmp Printer series User Manual
Page 57
Advertising
Changing Paper Size in Tray 2
1
Pull Tray 2 straight out of the printer
and remove any paper.
2
Press the top of the green paper width
guide toward the center of the tray.
The guide should detach from the
tray.
3
Align the pointer on the end of the
guide with the desired paper size.
4
Insert the two left side tabs into the
appropriate holes (
A
) and push back
on the guide to the upright position
(
B
), snapping the center tab into place.
For A4, Letter, Executive and B5 paper
sizes, skip to step 7 on the following
page. For Legal paper size continue with
step 5 below.
5
Locate the green subtray at the back
of Tray 2. Grasp the front corners of
the subtray and pull straight up to
remove.
Continue with step 6 on the following
page.
3-6
Printing Tasks
EN
Advertising