HP LaserJet 6pmp Printer series - Manual (Page 22)

Step 8. Install Printer Software
The printer is packaged with the software you need to take full
advantage of the printer’s features in Windows environments. The
HP LaserJet 6MP also comes with software you need to use the
PostScript language in both Macintosh and Windows environments.
You must install printing software before you can use this printer with
your software applications. (Please review the “HP Software Product
License” on page 6-7.)
The following descriptions will help you determine the correct software
to install.
Windows Printing System
Install this software when using Windows 3.1, Windows 3.11 for
Workgroups, or Windows 95 operating system on your IBM or
IBM-compatible computer.
•
See page 1-14 for installation instructions.
•
See page 2-15 for descriptions of the Windows Printing System
components.
DOS Remote Control Panel
Install this software if you will be printing from DOS-based software
applications.
•
See page 1-17 for installation instructions.
•
See page 2-18 for a description of the DOS Remote Control Panel.
Macintosh Printing Software
Install this software when using the printer with a Macintosh or
Macintosh-compatible computer.
•
See page 1-18 for installation instructions.
•
See page 2-19 for descriptions of the Macintosh Printing Software
components.
1
Pr
inter
S
et
up
EN
Printer Setup 1-13