HP LaserJet 6pmp Printer series - Manual (Page 41)

Example of a PostScript Configuration Page
A Settings:
Current printer default settings and product-specific information,
such as Printer Name and PostScript version. PostScript-specific
settings, include (but are not limited to):
•
HalftoneType: The current halftone type.
•
Wait Timeout: The PostScript timeout.
•
Printer Name: Name set by user (a network name, for
instance).
•
Print Errors: Value set on a job by job basis through the
printer driver.
•
PostScript Version: The version of PostScript installed.
•
System Password/Job Password: Values are either “0”
(default) or “Not Default” (a password is present).
•
Jam Recovery: Indicates whether Jam Recovery is ON or OFF.
B Printable Area:
Gives the dimensions within the margins of the image area.
Printable area is dependent on the amount of memory installed.
The current default is shown in the hollow box.
C Memory:
The value shows how PostScript uses printer memory. This may be
useful for more experienced users, since PostScript Level 2 allows
users to configure memory parameters. (See the PostScript Level 2
“Red Book” for specific information about these values.)
D Page Count:
Shows how many pages have been printed by the printer in all
printer languages. You can use the page count to track printer use.
2-12 Printer Basics
EN