HP LaserJet 6pmp Printer series - Manual (Page 61)

Printing on Both Sides of Media (Duplexing)
1 Print the first side of the media as you normally would.
2 To print the second side from Tray 1, make sure the printed side is
facing down with the top-edge towards the printer (
A ).
3 To print the second side from Tray 2, make sure the printed side is
facing up with the top-edge facing you (
B ).
Media orientation for duplex printing
Tips for Duplex Printing
•
Some software applications include “odd pages” and “even pages”
printing. If this option is available, print the even pages first using the
top output tray, then put the stack right side up in Tray 2 (
B ) and print
the odd pages.
•
Use the “Manual Feed with Pause” option in your software application to
pause the printer between sheets of paper, allowing you to insert the pages
one at a time. (See “Manual Feed Printing (Pausing between Pages)” on
page 3-9.)
N o t e When the second side is printing, you may experience a higher
frequency of paper misfeeds, paper jams, and multi-feeds. The print
quality may be different on the second side of the media.
Figure 3-5
3-10 Printing Tasks
EN