HP LaserJet 6pmp Printer series - Manual (Page 59)

Printing Tasks
Stopping a Print Job
A print job can be stopped from a software application, a print queue, or the
[Job[Cancel] button.
•
If the printer has not started printing, first try to cancel the job within the
software application that sent the print job.
•
If the print job is waiting in a print queue or print spooler (such as the
Print Manager in Windows 3.1), delete the job there.
•
If the print job is already printing, press the printer [Job[Cancel] button.
The printer will finish printing any pages that are already moving
through the printer and delete the rest of the print job.
If the top panel status lights continue to cycle after a job has been canceled
the computer is still sending the job to the printer. Either delete the job from
the print queue or wait until the computer has finished sending data. The
printer will return to a ready state (Ready [front] light on).
Job Cancel button
Job Cancel Tips
Pressing [Job[Cancel] cancels only the current job in the printer. If
more than one print job is in printer memory, [Job[Cancel] must be
pressed once for each job.
Figure 3-3
3-8 Printing Tasks
EN