HP LaserJet 6pmp Printer series - Manual (Page 27)

Installing the Macintosh Printing Software
The installation program for the Macintosh Printing Software will install all
of the components needed for printing in a Macintosh environment. See
page 2-19 for descriptions of the Macintosh Printing Software components.
1 Close all running applications.
2 Insert the CD or diskette into the appropriate drive.
3 Double-click the HP logo icon that appears on the desktop.
4 Double-click the Installer icon and follow the instructions on the screen.
N o t e The remaining installation instructions are based on whether or not
QuickDraw GX is installed on the Macintosh computer. If QuickDraw GX
is installed, skip to page 1-19. If you do not know if QuickDraw GX is
installed, follow the directions for the non-GX environment.
Completing Macintosh Installation in a Non-GX Environment
(most Macintosh users)
1 Make sure the printer is turned on and the ready (front) light is on.
2 Open the Chooser from the Apple menu.
3 Click the HP LaserJet icon.
4 If you are on a network with multiple zones, select the zone in the
AppleTalk Zones box where the printer is located. If this is unknown,
ask your network administrator.
5 Click on the HP LaserJet 6MP printer in the Select an HP LaserJet
Printer box.
6 Click Setup.
7 Choose a Background Printing option. Select On if you want to work on
the computer at the same time a job is being printed.
8 Close the Chooser by clicking the go-away (close) box in the upper left
corner.
The printer setup is complete!
1-18 Printer Setup
EN