Adaptec ANA-62000 - Manual (Page 175)

B-1
B
▼ ▼ ▼ ▼
Troubleshooting Tips
This appendix explains how to troubleshoot problems with your
DuraLAN NIC. If your NIC is not functioning properly, first make
sure that it was set up according to instructions in this User’s Guide.
1 Verify that your NIC is installed properly and configured
correctly, see Chapter 3, DuraLAN NIC Installation.
2 Verify that your network is properly cabled and the NIC is
properly connected (see Connecting the Network Cable on
page 3-6 and Appendix A, Cables and LEDs).
3 Verify that the DuraLAN driver is installed correctly
(see Part 2, Installing the DuraLAN NIC, or Part 3, The
DuraLink64 Driver for Windows
).
4 Verify that you are using the latest BIOS for your computer,
and the latest DuraLAN driver.
5 Verify that your cable, terminators, and connectors are
functioning properly, or install the NIC in a different slot.
6 See Adaptec Technical Support and Services on page ii if you still
have trouble.