Sony DCR-TRV70 - Manual (Page 109)

109
“Memory Stick” Operations
The POWER switch should be set to .
(1) Keep pressing PHOTO lightly and check the image. The green z indicator
stops flashing, then lights up. The brightness of the image and the focus are
adjusted, being targeted for the middle of the image, and are fixed. Recording
does not start yet.
(2) Press PHOTO deeply.
Recording is complete when the bar scroll indicator disappears.
The image displayed on the screen when you press PHOTO deeply is recorded
on the “Memory Stick.”
[a] Approximate number of images that can be recorded on the “Memory Stick” *
[b] Number of the folder currently used for recording
* The indication of the number of recordable still images
Depending on the image quality setting and the complexity of the subject, the indication
of the remaining number of recordable still images may not change even after you
record an image.
When the remaining number is greater than 9999, the >9999 indicator appears on the
screen.
Recording still images on a “Memory
Stick” – Memory Photo recording
1
/ 8 FINE
1600
[a]
[b]
2
FINE
1600
1 0 1
1 0 1
PHOTO
PHOTO
VCR
MEMORY/
NETWORK
CAMERA
OFF(CHG)
POW
ER
POWER switch