Sony DCR-TRV70 - Manual (Page 86)

86
Operation 1: Making a Program
The POWER switch should be set to .
Operate by touching the panel.
(1) Insert the cassette for playback into your camcorder, and insert a cassette for
recording into the VCR.
(2) Press FN to display PAGE1.
(3) Press MENU.
(4) Select VIDEO EDIT in
, then press EXEC.
(5) Select TAPE, then press EXEC.
(6) Search for the beginning of the first scene you want to insert using the video
control buttons on the screen, then pause playback. You can fine-adjust one
frame at a time with
/ .
(7) Press MARK IN on the screen or MARK on the Remote Commander.
The IN point of the first program is set, and the upper part of the program
mark changes to light blue.
(8) Search for the end of the first scene you want to insert using the video control
buttons on the screen, then pause playback. You can fine-adjust one frame at
a time with
/ .
(9) Press MARK OUT on the screen or MARK on the Remote Commander.
The OUT point of the first program is set, then the lower part of the program
mark changes to light blue.
(10) Repeat Step 6 to 9.
You can set up to 20 programs in maximum.
To finish making programs
Press END.
The program is stored in memory until the tape is ejected.
Dubbing only desired scenes – Digital program editing (on a tape)
7
9 10
4 5
ED I T
SET UNDO
0:10:01:23
TOTAL
SCENE 0:00:47:12
3
V I DEO ED I T
MARK
I N START
END
ED I T
SET UNDO
0:09:07:06
TOTAL
SCENE 0:00:13:00
1
V I DEO ED I T
MARK
I N START
END
ED I T
SET UNDO
0:08:55:06
TOTAL
SCENE 0:00:00:00
0
V I DEO ED I T
MARK
OUT START
END
0:32:30:14
TOTAL
SCENE 0:00:00:00
0
V I DEO ED I T
MARK
I N START ED I T
SET UNDO
END
OTHERS
DATA CODE
BEEP
COMMANDER
D I SPLAY
V I DEO ED I T
EXIT
RET. EXEC
RETURN
TAPE
MEMORY