Sony DCR-TRV70 - Manual (Page 18)

18
Checking the status of the battery pack – Battery Info
(1) Set the POWER switch to OFF (CHG).
(2) Press OPEN to open the LCD panel.
(3) Press DISPLAY/BATT INFO.
The battery charge level (the percentage of the current remaining battery time
to the recording time when fully charged) and remaining battery time when
using the LCD screen or viewfinder are displayed for about seven seconds.
If you keep pressing DISPLAY/BATT INFO, the indicator is displayed for
about 20 seconds.
Note
The BATT INFO indicator may not be displayed in the following cases:
– The battery pack is not properly installed.
– Something is wrong with the battery pack.
– The battery is discharged completely.
Battery Info
The number displayed as Battery Info is the approximate recording time.
While the remaining battery time is being calculated
“CALCULATING BATTERY INFO...” is displayed.
Step 1 Preparing the power source
BATTERY INFO
BATTERY CHARGE LEVEL
REC TIME AVAILABLE
LCD SCREEN
VIEWFINDER :
: 80
100
min
min
0% 50%
BATTERY INFO
BATTERY CHARGE LEVEL
REC TIME AVAILABLE
LCD SCREEN
VIEWFINDER :
: 105
125 min
min
0% 50% 100%
DISPLAY/
BATT INFO
3
100%
During charging Fully charged