Sony DCR-TRV70 - Manual (Page 155)

155
Viewing images with your computer
Viewing images recorded on the “Memory Stick”
Step1: Uninstall the incorrect USB driver
1 Turn on the computer and allow Windows to load.
2 Insert the “Memory Stick” into your camcorder.
3 Connect the AC Adaptor and set the POWER switch to MEMORY.
4 Connect the USB port on the computer to the (USB) jack on your camcorder
using the supplied USB cable.
5 Open the computer’s “Device Manager.”
Windows XP:
Select “Start”
t “Control Panel” t “System” t “Hardware,” and click the
“Device Manager” button.
If there is no “System” inside “Pick a category” after clicking “Control Panel,”
click “Switch to classic view” instead.
Windows 2000:
Select “My Computer”
t “Control Panel” t “System” t “Hardware,” and
click the “Device Manager” button.
Other OS:
Select “My Computer”
t “Control Panel” t “System,” and click “Device
Manager.”
6 Select “Other devices.”
Select the device prefixed with the “?” mark and delete.
Ex: (?)Sony Handycam
7 Set the POWER switch to OFF (CHG) on your camcorder, then disconnect the
USB cable.
8 Restart the computer.
Step2: Install the USB driver on the supplied CD-ROM
Follow the entire procedure in “Installing the USB driver” on page 148.
Connecting your camcorder to a computer using the USB cable
(For Windows users)